Product Details:
Payment & Shipping Terms:
|
Keywords: | Hydraulics Sleeve | Material: | Bronze |
---|---|---|---|
Apply For: | Hydraulic Machinery | Size: | Customizable |
Feature: | Maintenance-free | Advantage: | Anti-corrosion |
High Light: | flanged sleeve bearing,sliding shaft bearing |
Hydraulic Machinery Use Sliding Bearing High Load Capacity Anti Corrosive
1. Product Description
Hydraulics Sleeve Guide Pump Bushings Stock and Manufacture Wiht Solutions for are made of strong cast bronze based metal with special solid lubricants embedded. The base metal withsands high load and the solid lubricants provide for self-lubrication.WHB bearing provides a maintenance-free bearing solution,particularly for high load,intermient of oscil.This kind of bearing can be applied under dry,high temperaturre,high pressure,corrosive,water or other chemical environments when no oil can be introduced.
2. Specification
Basic material | CuSn10Pb10 | Friction | Oil Lubrication | 0.09μ |
Density | 8.9g/cm³ | Dry Friction | 0.18 μ | |
Heat-conducting Coefficient | 30~60(w/m.k) | Tensility | ≥6% | |
Tensile Strength | ≥210 N/mm2 | Working Temperature Limits | -40℃~+400℃ | |
Anti-impact Tenacity | ≥400-500 KJ/m3 | Max Load Pressure | 60N/mm2 | |
Hardness | ≥75HB | Max Linear Velocity | 0.2m/s | |
Flexibility Coefficient | 100-150 KN/mm2 | Max PV Value | 3.8N/mm2.m/s |
3. Application
Hydraulics Sleeve Guide Pump Bushings Stock and Manufacture Wiht Solutions for are widely applied in metallurgical machinery,hydraulic cylinder,marine machinery etc.
4. Advantages
WHB bearing shows excellent performance without pre-lubrication underconditions of extreme high/lower temperature with low speed.It is applicable to the working parts that cannot be lubricated or are difficult to be lubricated, with good wear resistance, small friction coefficient and long service life.Good walking performance, low noise, no pollution, good corrosion resistance.The transfer film formed during operation plays a role in protecting the grinding shaft, and there is no shaft biting phenomenon.The processing requirement of grinding shaft is reduced, and the processing cost is reduced.It is widely used in general industry.
Contact Person: Mr. Hang
Tel: 86-13616738224
Fax: 86-573-84614510